Server cabinet specifications - Sheet Metal Parts

The server cabinet has requirements on the depth, height and load-bearing of the cabinet. The height is 2.2M, 2.0m, 1.8m, 1.6m, 1.4m, 1.2m, 1M, etc; The width is 800mm, 700mm or 600mm; The depth is 800mm, 900mm and 1000mm.

It can be configured with: special fixed tray, special sliding tray, power support, caster, anchor nail, wire management ring, wire management frame, l support, expansion beam, etc. The main frame, front and rear doors, left and right-side doors can be quickly disassembled.

Fixed tray: it is used to install various equipment. It has a wide range of sizes and uses, including 19 “standard tray, non-standard fixed tray, etc. the depth of conventional fixed tray is 440mm, 480mm, 580mm, 620mm, etc. the load-bearing capacity of fixed tray is not less than 50kg.

Sliding tray: used to install keyboard and other equipment, which can be easily pulled out and pushed back; The 19 “standard sliding tray is suitable for any 19” standard cabinet. The depth of sliding tray for conventional configuration has two specifications: 400mm and 480mm. The bearing capacity of sliding tray shall not be less than 20kg.

Related Posts